woolwax
Woolwax™ "Pro" Undercoating Gun with (3) bottles (empty) and (2) flexible extension wands.
Couldn't load pickup availability
Woolwax™ prices shown are in CAN$ and include shipping. There are no additional fees collected on delivery.
**** THIS ITEM MAY BE AVAILABLE FASTER AT Amazon.ca *** See link below:
Woolwax™ Pro Gun on Amazon.ca
This is the Woolwax™ PRO applicator gun . We consider this to be the best applicator spray gun available for Woolwax™ undercoating applications. We had this gun modified and developed specifically for Woolwax™ undercoating. This gun comes complete with (1) 18" flexible wand with 360° nozzle, and a 24" flexible wand.
- Modified internally to apply Woolwax™ undercoat
- Adjustable nozzle for flow control
- Includes (3) clear quart bottles with caps
- Includes 24" flexible open-end wand
- Includes 18" flexible 360° extension wand
- European Frame. Modified & Assembled in USA
Kellsport Products undercoating guns use very little pressure. Only 70-90psi. Most compressors run around 125 psi. So the psi and the cfm are not really important in this application. The tank size is important. We recommend no smaller than a 3 gallon tank size. Any smaller than that and you are constantly waiting for the tank to recover. Most very small compressors will say on the box "not adequate for spray painting". As long as you can spray paint with a compressor, you can use it to undercoat. Many people have told us they they have bought inexpensive compressors and they work just fine.
We suggest putting an inexpensive regulator on the gun end so you can tweak it from the gun without having to go back and forth to the compressor. Don't try to remove the fitting at the bottom of the gun handle, as it does not come off. It's a standard 1/4" fitting. bring the gun with you to the store for the right connection.
Our Undercoat guns do not need to be cleaned after use when using with Woolwax®. Woolwax® undercoating is solvent free, so there is no evaporation or hardening process. The Woolwax® left in the bottle will thicken over time. But you can restore to its original viscosity by shaking vigorously.
Some people do prefer to clean the gun and wands. To do this we recommend just putting some solvent (acetone, mineral spirits, paint thinner, etc.) into one of the bottles and spraying a bit through the gun. Some people just put water and dishwashing liquid into the bottle, and they say that it works fine.
Most people just leave the gun loaded and ready to go without doing anything at all. That way you can do a quick touch-up or spray some outdoor power equipment with almost no setup time.
Bottom line……. Don’t worry about the undercoat guns when using Woolwax®. They won’t clog.
All the prices listed on our site includes all shipping costs, customs fees, and all of Canada taxes. You pay only the price that is listed (in $CAN)
Shipping & Returns
Shipping & Returns
WOOLWAX® CANADA....Now shipping to Canada. 888-341-4600
